Teagle Tomahawk 505M
Tomahawk 505MThe farmers choice for producing consistently short material from dry bales. |
Fast effective milling of straw and miscanthus to a very consistent chop length, as short as 13 ⁄ 8".OperationBlow straw up to 30', discharge to one or both sides of the tractor. Alternative delivery chutes are available to suit your requirements.The Tomahawk 404M, 505M and 505XLM bale processors use blades or hammers to chop dry material small enough to pass through the holes in a screen. A range of screens are available with holes from 15mm to 36mm to obtain material of a consistent chop length. Easy control of output by adjusting the speed of drum rotation. |
Configurations
Various drum extensions are available for ease of operation or to accommodate larger rectangular bales. The 404M/505M/505XLM range is suitable for dry material only, and will not cut silage as it will block the mill sieve. |
British built and backedFor your peace of mind Tomahawks are backed by an efficient after sales service from our production facility in Cornwall, England.The Tomahawk Drum models are economical, simple and robust. There are no gearboxes, with the drive to the rotor being direct from the tractor, a hydraulic motor is used to rotate the drum. Due to their simplicity and strength, customers can expect a long service life from their Tomahawk. |
Netting or wrap is easily removed at a safe working height. Adjustment of the drum angle with the optional hydraulic top link makes the operation even easier. |
Knife system for high feed rate - use only with screen sizes greater than 12mm. |
Hammer system for heavier duty or stoney applications and very short chop lengths. |
Length of material is determined by the screen which is fitted. The nature of the material has some effect upon actual shredded length and some variation is likely to occur. Screen sizes available are 10, 12, 15, 18, 21, 28, 36, 50mm holes and 120mm slots. |
Chute on the left and right hand sides can be opened and closed independently. |
Direct drive from rotor to shaft - no gearbox. |
For driveline protection a slip clutch is fitted as standard on the PTO shaft. |
Easy Loading
Knife System
Hammer System
Choice of Material Chop Length
Chute On/Off Levers
Direct Drive
Slip and overrun on PTO
|
Trailed Chassis
Accommodates all models in the Drum Tomahawk range. Available with a choice of ring, ball or clevis hitch. Lower link beam kit also available. |
Length of material is determined by the screen. The nature of the material has some effect upon actual shredded length and some variation is likely to occur. We offer a variety of screen sizes 10, 13, 15, 18, 21, 25, 28, 36 holes and 50mm and 120mm slotted. All made from durable Hardox. |
Heavy duty, strong enough to allow you to change the angle of the machine whilst the drum is loaded. |
Only suitable for dry material. It will blow long straw up to 12 metres at 1000rpm. |
Quick attach A-Frame, allows quick coupling of the Tomahawk onto the tractor. |
Electric Drive
Electric motor drive options available. Contact us for more information. |
Various Drum Lengths
5' and 6' long drums are also available so a second bale can be loaded before the first is finished, to maintain a consistent feed rate and chop length. 8' long drum x 5' diameter, available only on the Tomahawk 404 - 404M - 4040. |
Hydraulic Deflector
To control delivery, available on all Giraffe Chutes. |
9' Long Drum 505XLM Model
Takes full length rectangular bales 4' x 4' or two round bales. Centre supports for strength and reliability. |
Swivel Giraffe Chute
Discharge height on 505M 3m (10') (if Tomahawk is lifted 30cm (12") above ground). Dry material only. Optional motor kit available. |
Choice of material chop length
Hydraulic Top Link
Straw Giraffe Chute
Quick Hitch A-Frame
Videos
Bale-Processor-Guide.pdfCONTACT US
Harco Ag Equipment
5808 Hwy #9, R. R. #4
Harriston, ON, N0G 1Z0
phone 519-338-2923
QUICK LINKS
OPENING HOURS
Monday to Friday
8:00AM - 5:00PM
Saturday
8:00AM - 12:00PM
Sunday
Closed
LOCATION
Monday to Friday: 8:00AM - 5:00PM
Saturday: 8:00AM - 12:00PM
Sunday: Closed
Harco Ag Equipment
5808 Hwy #9, R. R. #4
Harriston, ON, N0G 1Z0
519-338-2923
