Stock # 709999

Teagle C12

Videos

Call for Price

Get a Quote Get Financed Value a Trade Contact Us Book a Demo Get Directions Get Directions Print

Overview

Tomahawk C12 Calibrator Bale Processor.

Designed for contractors and large scale operators, processing up to 11t/hr

A high capacity mill for processing dry materials such as straw and miscanthus to a consistently short length for bedding, feeding and biofuel

Straight forward setting of material output

Quick change screens can be switched at ground level in minutes. The two-part screens are reversible and can be fitted in various combinations to control output of finished product.

Only 1 operator required with Automatic Power Loading
To maximise throughput and prevent overloading, the C12 governs bale chamber rotation automatically. Tractor power loading is controlled remotely from the loader vehicle via Bluetooth®.

Designed for Contractors and Large Scale operators

The C12 is homologated to 40km/hr, incorporating Air/Hydraulic braking combinations. Service intervals are extended with high performance steel hammers and a wear resistant Carbide edge facing.

Capacity - Up to 11t/hr
Tractor HP - 120-200
Material output - ³ ⁄ ₈"_-4"

Specifications

Model

C12

Category Name

Livestock & Feeding

Year

2021

Sale Type

New

Manufacturer

Teagle

benefits and features

Folding Conveyor
The hydraulic drive high speed conveyor delivers milled material up to 4.2m high into a trailer or onto a bunker pile with a minimum of dust. The conveyor folds neatly over the bale chamber for transport – all from the comfort of the tractor seat.

Lozenge Bale Chamber
Is designed to fall within the maximum legal road transport width. Its shape means that it can easily be loaded with a tractor fore-end loader or telehandler.

Spare Screen Storage
Up to four optional spare screens can be stored in a rack positioned within the C12 body for safe transportation and instant access on farm.

Visible Warnings and Safety
A beacon on the viewing platform flashes when the rotor speed drops to below 1800 rpm. This warns the operator not to load more material until the speed has recovered. It also serves to warn against climbing into the bale chamber. An emergency stop button, accessible from ground level, instantly stops the bale chamber rotation and the conveyor operation.

Independent Hydraulics
Protect the tractor hydraulics from overheating and contamination with the independent hydraulic system driven from the PTO. Fitted with 60 litre/min pump, 150 litre reservoir and oil cooler with auto-reverse cooling fan.

Robust Bale Chamber Support & Drive
A heavy duty double pitch chain drives the Bale Chamber, which sits on and is guided by large diameter rollers.

Quick Change Screens
Screen switch is achieved at ground level from the rear of the C12, with no need to climb in bale chamber.

High Capacity Driveline
The driveline has shearbolt protection, overrun protection, and finally a massive 8 belt system with 200HP capacity.

Super Heavy Duty Wearing Parts
Hammers are through hardened boron steel with ARMATECH PLUS® edge facing. Each hammer has 4 wearing edges and runs on a hardened bush.

Thoughtful Design
A ladder and platform provide a safe viewing position into the bale chamber.
Hinged covers provide easy access into the driveline and other working parts.

Stay in Control
A robust Bluetooth control desk provides remote control of bale chamber rotation and thus power consumption, from up to 50m away in the loading vehicle cab.

High Capacity Rotor
Rotor speed is 2000rpm, generating a tip speed of 73m/s.

Calibrate Output
Interchangeable screens comprise two quarter cylinder sections that are reversible when worn to maintain milling performance. For additional cut control, hole sizes in each quarter screen can be different.

Safe Road Transport
The C12 is homologated to 40km/hr, incorporating Air/Hydraulic braking combinations, approved 285/55 R22 wheels, 300mm x 90mm Brake Drums and various hitch options. Road lighting includes LED lamps and strobe, as well as statutory side markers.

Easy Maintenance
Central lubrication is provided throughout for ease of maintenance - no need to clamber under the machine to find grease nipples.

product specifications


	C12
PTO Speed	1000rpm
Loading Height	9'
Transport Width	8'
Transport Length	19'6"
Transport Height	10'6"
Working Length	28'8"
Conveyor Discharge Height	13'10"
Bale Chamber Diameter at Base	87"
Bale Chamber Loading Diameter	87" - 118"
Weight.	12,500 lb
Dual Air / Hydraulic Brakes	Std.
Minimum tractor size	160 hp

additional options

Additional Screens
Quick change screens available with 100mm, 75mm, 60mm, 40mm, 30mm and 20mm sizes. (2 screens supplied as standard with machine).

Conveyor Deflector
The Conveyor Deflector controls straw discharge when filling a trailer.

Drawback Hitch and Jack
An optional 80mm ball hitch can be specified in lieu of the standard bolt-on ring hitch. A manual Jack is available for either hitch type.

Grain Milling Hopper
Fit the optional Grain Milling hopper into the bale chamber and fine screens
to the milling system to quickly convert the C12 from a bale processor to a high capacity grain mill.

literature

Name	Link
C12 Grain Hopper Brochure	Download
2025 Product Guide	Download
C12 Bale Processor Brochure	Download

Videos

Documents

Call for Price

Pricing excludes licensing and tax

Get a Quote Get Financed Value a Trade Contact Us View Pre-Owned Book a Demo Get Directions Get Directions Print

CONTACT US

Harco Ag Equipment

5808 Hwy #9, R. R. #4
Harriston, ON, N0G 1Z0

phone 519-338-2923

MAP & HOURS

QUICK LINKS

OPENING HOURS

Monday to Friday

8:00AM - 5:00PM

Saturday

8:00AM - 12:00PM

Sunday

Closed

LOCATION

Map & Hours

Monday to Friday: 8:00AM - 5:00PM

Saturday: 8:00AM - 12:00PM

Sunday: Closed

Harco Ag Equipment

5808 Hwy #9, R. R. #4
Harriston, ON, N0G 1Z0

519-338-2923

quick links

Shortline Distributor and Manufacturer Representatives

Teagle C12

Tomahawk C12 Calibrator Bale Processor.

A high capacity mill for processing dry materials such as straw and miscanthus to a consistently short length for bedding, feeding and biofuel

Straight forward setting of material output

Only 1 operator required with Automatic Power Loading To maximise throughput and prevent overloading, the C12 governs bale chamber rotation automatically. Tractor power loading is controlled remotely from the loader vehicle via Bluetooth®.

Designed for Contractors and Large Scale operators

Folding Conveyor The hydraulic drive high speed conveyor delivers milled material up to 4.2m high into a trailer or onto a bunker pile with a minimum of dust. The conveyor folds neatly over the bale chamber for transport – all from the comfort of the tractor seat.

Lozenge Bale Chamber Is designed to fall within the maximum legal road transport width. Its shape means that it can easily be loaded with a tractor fore-end loader or telehandler.

Spare Screen Storage Up to four optional spare screens can be stored in a rack positioned within the C12 body for safe transportation and instant access on farm.

Independent Hydraulics Protect the tractor hydraulics from overheating and contamination with the independent hydraulic system driven from the PTO. Fitted with 60 litre/min pump, 150 litre reservoir and oil cooler with auto-reverse cooling fan.

Robust Bale Chamber Support & Drive A heavy duty double pitch chain drives the Bale Chamber, which sits on and is guided by large diameter rollers.

Quick Change Screens Screen switch is achieved at ground level from the rear of the C12, with no need to climb in bale chamber.

High Capacity Driveline The driveline has shearbolt protection, overrun protection, and finally a massive 8 belt system with 200HP capacity.

Super Heavy Duty Wearing Parts Hammers are through hardened boron steel with ARMATECH PLUS® edge facing. Each hammer has 4 wearing edges and runs on a hardened bush.

Thoughtful Design A ladder and platform provide a safe viewing position into the bale chamber. Hinged covers provide easy access into the driveline and other working parts.

Stay in Control A robust Bluetooth control desk provides remote control of bale chamber rotation and thus power consumption, from up to 50m away in the loading vehicle cab.

High Capacity Rotor Rotor speed is 2000rpm, generating a tip speed of 73m/s.

Calibrate Output Interchangeable screens comprise two quarter cylinder sections that are reversible when worn to maintain milling performance. For additional cut control, hole sizes in each quarter screen can be different.

Safe Road Transport The C12 is homologated to 40km/hr, incorporating Air/Hydraulic braking combinations, approved 285/55 R22 wheels, 300mm x 90mm Brake Drums and various hitch options. Road lighting includes LED lamps and strobe, as well as statutory side markers.

Easy Maintenance Central lubrication is provided throughout for ease of maintenance - no need to clamber under the machine to find grease nipples.

Additional Screens Quick change screens available with 100mm, 75mm, 60mm, 40mm, 30mm and 20mm sizes. (2 screens supplied as standard with machine).

Conveyor Deflector The Conveyor Deflector controls straw discharge when filling a trailer.

Drawback Hitch and Jack An optional 80mm ball hitch can be specified in lieu of the standard bolt-on ring hitch. A manual Jack is available for either hitch type.

Grain Milling Hopper Fit the optional Grain Milling hopper into the bale chamber and fine screens to the milling system to quickly convert the C12 from a bale processor to a high capacity grain mill.

Videos

Documents

CONTACT US

Harco Ag Equipment

QUICK LINKS

OPENING HOURS

LOCATION

Harco Ag Equipment

Only 1 operator required with Automatic Power Loading
To maximise throughput and prevent overloading, the C12 governs bale chamber rotation automatically. Tractor power loading is controlled remotely from the loader vehicle via Bluetooth®.

Folding Conveyor
The hydraulic drive high speed conveyor delivers milled material up to 4.2m high into a trailer or onto a bunker pile with a minimum of dust. The conveyor folds neatly over the bale chamber for transport – all from the comfort of the tractor seat.

Lozenge Bale Chamber
Is designed to fall within the maximum legal road transport width. Its shape means that it can easily be loaded with a tractor fore-end loader or telehandler.

Spare Screen Storage
Up to four optional spare screens can be stored in a rack positioned within the C12 body for safe transportation and instant access on farm.

Independent Hydraulics
Protect the tractor hydraulics from overheating and contamination with the independent hydraulic system driven from the PTO. Fitted with 60 litre/min pump, 150 litre reservoir and oil cooler with auto-reverse cooling fan.

Robust Bale Chamber Support & Drive
A heavy duty double pitch chain drives the Bale Chamber, which sits on and is guided by large diameter rollers.

Quick Change Screens
Screen switch is achieved at ground level from the rear of the C12, with no need to climb in bale chamber.

High Capacity Driveline
The driveline has shearbolt protection, overrun protection, and finally a massive 8 belt system with 200HP capacity.

Super Heavy Duty Wearing Parts
Hammers are through hardened boron steel with ARMATECH PLUS® edge facing. Each hammer has 4 wearing edges and runs on a hardened bush.

Thoughtful Design
A ladder and platform provide a safe viewing position into the bale chamber.
Hinged covers provide easy access into the driveline and other working parts.

Stay in Control
A robust Bluetooth control desk provides remote control of bale chamber rotation and thus power consumption, from up to 50m away in the loading vehicle cab.

High Capacity Rotor
Rotor speed is 2000rpm, generating a tip speed of 73m/s.

Calibrate Output
Interchangeable screens comprise two quarter cylinder sections that are reversible when worn to maintain milling performance. For additional cut control, hole sizes in each quarter screen can be different.

Safe Road Transport
The C12 is homologated to 40km/hr, incorporating Air/Hydraulic braking combinations, approved 285/55 R22 wheels, 300mm x 90mm Brake Drums and various hitch options. Road lighting includes LED lamps and strobe, as well as statutory side markers.

Easy Maintenance
Central lubrication is provided throughout for ease of maintenance - no need to clamber under the machine to find grease nipples.

Additional Screens
Quick change screens available with 100mm, 75mm, 60mm, 40mm, 30mm and 20mm sizes. (2 screens supplied as standard with machine).

Conveyor Deflector
The Conveyor Deflector controls straw discharge when filling a trailer.

Drawback Hitch and Jack
An optional 80mm ball hitch can be specified in lieu of the standard bolt-on ring hitch. A manual Jack is available for either hitch type.

Grain Milling Hopper
Fit the optional Grain Milling hopper into the bale chamber and fine screens
to the milling system to quickly convert the C12 from a bale processor to a high capacity grain mill.